Auto PCB separator can separate up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB separator can satisfy for the 3-5 SMT line output. Almost cover the PCB separation in high-volume electronics assembly production.
Features:
* Multi Auto PCB separator equipped with multiple sets of cutting wheel which can separate the whole PCB panel at one time.
* The distance between upper and lower cutter can be precisely adjusted, the separating
thickness of PCB range is : 0.8MM-3.0MM.
* Suitable separating material of PCB :aluminum ,FR4,glass fiber.
* This Auto PCB separator with 2 cutting module and 3 cutting module optional via the PCB board material.The whole cutting process is divided into 2 or 3 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth and won’t bend and twist after cutting.
* Unique bar design, can quickly separating the edge of the LED board, for the development of LED aluminum substrate, also suitable for other long LED panel.
* Can install the SMEMA port and customized to be the online version Auto PCB separator, it can connect to the full automatic SMT assembly line. And achieve the intelligent production demand.
ASCEN as a PCB separator manufacturer provide the full SMT manufacturing equipment, producing different type PCB depaneling machine, include the blade moving type V-cut PCB separator, cutting disc type PCB cutting separator , Pneumatic cutting type PCB separator , Aluminum PCB separator , PCB punching separator , manual pcb separator, PCB depaneling router, Multi cutter PCB cutting machine are available as standard and customized products and can be equipped to fit special requirements
|
Item |
Scope of application |
Model number
(Auto PCB separator) |
ASC-900N |
|
Dimensions(L*W*H) |
2160*570*1050mm |
|
Cutting speed |
200-400mm/s |
|
Power |
500W |
|
PCB Board thickness |
0.2-3mm |
|
Maximum PCB board length |
Unlimited |
|
Maximum cutting width |
280mm |
|
Minimum cutting width |
8mm |
|
Minimum cutting length |
250mm |
|
Working temperature |
10-35 degree |
|
PCB maximum component height |
15mm |
|
Power Supply |
1P AC220V 50Hz or 110V/60Hz |
